Chúng tôi tập trung vào lĩnh vực đang rất mới ở Việt Nam - Khí đặc biệt, khí hiếm, khí hỗn hợp theo nhu cầu khách hàng và dịch vụ kỹ thuật khí cao cấp.

Khí đặc biệt - khí tinh khiết - khí hỗn hợp - thiết bị và dịch vụ kỹ thuật ngành khí


Product name: Tetrafluoromethane

Chemical formula: CF4

Synonyms: Tetrafluoromethane (R14), Halocarbon-14, Carbon Tetrafluoride

Product Use Description: General Industrial

Product name :                       Tetrafluoromethane

Chemical formula :                  CF4

Synonyms :                             Tetrafluoromethane (R14), Halocarbon-14, Carbon Tetrafluoride

Product Use Description :      General Industrial

Company :                                Special Gas Vietnam JSC



CAS Number

Concentration (Volume)



100 %

Concentration is nominal


Emergency Overview

High pressure gas.

Can cause rapid suffocation.

Self contained breathing apparatus (SCBA) may be required.

Potential Health Effects

Inhalation : In high concentrations may cause asphyxiation. Asphyxiation may bring about unconsciousness with out warning and so rapidly that victim may be unable to protect themselves.

Eye contact :                No adverse effect.

Skin contact :                No adverse effect.

Ingestion :                     Ingestion is not considered a potential route of exposure.

Chronic Health Hazard : Not applicable.

Exposure Guidelines

Primary Routes of Entry : Inhalation

Target Organs :                         None known.

Symptoms :  Exposure to oxygen deficient atmosphere may cause the following symptoms: Dizziness. Salivation. Nausea. Vomiting. Loss of mobility/consciousness.

Aggravated Medical Condition


Environmental Effects

Not harmful.


General advice :  Remove victim to uncontaminated area wearing self contained breathing apparatus. Keep victim warm and rested. Call a doctor. Apply artificial respiration if breathing stopped.

Eye contact :     Not applicable.

Skin contact :    Not applicable.

Ingestion :         Ingestion is not considered a potential route of exposure.

Inhalation :     Remove to fresh air. If breathing has stopped or is labored, give assisted respirations. Supplemental oxygen may be indicated. If the heart has stopped, trained personnel should begin cardiopulmonary resuscitation immediately. In case of shortness of breath, give oxygen.


Suitable extinguishing media :    All known extinguishing media can be used.

Specific hazards : Upon exposure to intense heat or flame, cylinder will vent rapidly and or rupture violently. Product is nonflammable and does not support comb ustion. Move away from container and cool with water from a protected position. Keep containers and surroundings cool with water spray.

Special protective equipment for fire-fighters : Wear self contained breathing apparatus for fire fighting if necessary.


Personal precautions :Evacuate personnel to safe areas. Wear self-contained breathing apparatus when ente ring area unless atmosphere is proved to be safe. Monitor oxygen level. Ventilate the area.

Environmental precautions : Do not discharge into any place where its accumulation could be dangerous. Prevent further leakage or spillage if safe to do so.

Methods for cleaning up :    Ventilate the area.

Additional advice : If possible, stop flow of product. Increase ventilation to the release area and monitor oxygen level. If leak is from cylinder or cylinder valve, call the Air Products emergency telephone number. If the leak is in the user's system, close the cylinder valve and safely vent the pressure before attempting repairs.



Protect cylinders from physical damage; do not drag, roll, slide or drop. Do not allow storage area temperature to exceed 50°C (122°F). Only experienced and proper ly instructed persons should handle compressed gases. Before using the product, determine its identity by reading the label. Know and understand the properties and hazards of the product before use. When doubt exists as to the correct handling procedure for a particular gas, contact the supplier. Do not remove or deface labels provided by the supplier for the identification of the cylinder contents. When moving cylinders, even for short distances, use a cart (trolley, hand truck, etc.) designed to transport cylinders. Leave valve protection caps in place until the container has been secured against either a wall or bench or placed in a container stand and is ready for use. Use an adjustable strap wrench to remove over-tight or rusted caps. Before connecting the container, check the complete gas system for suitability, particularly for pressure rating and materials. Before connecting the container for use, ensure that back feed from the system into the container is prevented. Ensure the complete gas system is compatible for pressure rating and materials of construction. Ensure the complete gas system has been checked f or leaks before use. Employ suitable pressure regulating devices on all containers when the gas is being emitted to systems with lower pressure rating than that of the container. Never insert an object (e.g. wrench, screwdriver, pry bar, etc.) into valve cap openings. Doing so may damage valve, causing a leak to occur. Open valve slowly. If user experiences any difficulty operating cylinder valve discontinue use and contact supplier. Close container valve after each use and when empty, even if still connected to equipment. Never attempt to repair or modify container valves or safety relief devices. Damaged valves should be reported immediately to the supplier. Close valve after each use and when empty. Replace outlet caps or plugs and container caps as soon as container is disconnected from equipment. Do not subject containers to abnormal mechanical shocks which may cause damage to their valve or safety devices. Never attempt to lift a cylinder by its valve protection cap or guard. Do not use containers as rollers or supports or for any other purpose than to contain the gas as supplied. Never strike an arc on a compressed gas cylinder or make a cylinder a part of an electrical circuit. Do not smoke while handling product or cylinders. Never re-compress a gas or a gas mixture without first consulting the supplier. Never attempt to transfer gases from one cylinder/container to another. Always use backflow protective device in piping. When returning cylinder install valve outlet cap or plug leak tight. Never use direct flame or electrical heating devices to raise the pressure of a container. Containers should not be subjected to temperatures above 50°C (122°F). Prolonged periods of cold temperature below -30°C (-20°F) should be avoided.


Contains fluorinated greenhouse gases covered by Kyoto Protocol. For quantities see concentrations or cylinder contents. Full containers should be stored so that oldest s tock is used first. Containers should be stored in a purpose build compound which should be well ventilated, preferably in the open air. Stored containers should be periodically checked for general condition and leakage. Observe all regulations and local requirements regarding storage of containers. Protect containers stored in the open against rusting and extremes of weather. Containers should not be stored in conditions likely to encourage corrosion. Containers should be stored in the vertical position and properly secured to prevent toppling. The container valves should be tightly closed and where appropriate valve outlets should be capped or plugged. Container valve guards or caps should be in place. Keep containers tightly closed in a cool, well-ventilated place. Store containers in location free from fire risk and away from sources of heat and ignition. Full and empty cylinders should be segregated. Do not allow storage temperature to exceed 50°C (122°F). Return empty containers in a timely manner.

Technical measures/Precautions

Containers should be segregated in the storage area according to the various categories (e.g. flammable, toxic, etc.) and in accordance whit local regulations. Keep away from combustible material.


Engineering measures

Provide natural or mechanical ventilation to prev ent oxygen deficient atmospheres below 19.5% oxygen.

Personal protective equipment

Respiratory protection : Self contained breathing apparatus (SCBA) or posi tive pressure airline with mask are to be used in oxygen-deficient atmosphere. Air purifying respirators will not provide protection. Users of breathing apparatus must be trained.

Hand protection :Sturdy work gloves are recommended for handling cylinders. The breakthrough time of the selected glove(s) must be greater than the intended use period.

Eye protection : Safety glasses recommended when handling cylinders.

Skin and body protection : Safety shoes are recommended when handling cylinders.

Special instructions for protection and hygiene:  Ensure adequate ventilation, especially in confined areas.


Form :                                      Compressed gas.

Color :                                      Colorless gas

Odor :                                       No odor warning properties.

Molecular Weight :                 88 g/mol

Relative vapor density :        3 (air = 1)

Vapor pressure             :        Not applicable.

Density :                                   0.231 lb/ft3 (0.0037 g/cm3) at 70 °F (21 °C)

Note: (as vapor)

Specific Volume :      4.38 ft3/lb (0.2734 m3/kg) at 70 °F (21 °C)

Boiling point/range :     -198 °F (-128 °C)

Critical temperature :   -49 °F (-45 °C)

Melting point/range :    -299 °F (-184 °C)

Water solubility        0.02 g/l


Stability :   Stable under normal conditions.

Hazardous decomposition products:            None.


Acute Health Hazard

Ingestion :   No data is available on the product itself.

Inhalation :  No data is available on the product itself.

Skin. :  No data is available on the product itself.


Ecotoxicity effects

Aquatic toxicity :    No data is available on the product itself.

Toxicity to other organisms : No data available.

Persistence and degradability

Mobility :  No data available.

Bioaccumulation : No data is available on the product itself.

Further information

Not covered by the 'Montreal Protocol'. Contains fluorinated greenhouse gases covered by Kyoto Protocol. For quantities see concentrations or cylinder contents.


Waste from residues / unused

products :                                             Contact supplier if guidance is required. Return unused product in original cylinder to supplier.

Contaminated packaging :         Return cylinder to supplier.



Proper shipping name :       Tetrafluoromethane

Class :        2.2

UN/ID No. :     UN1982


Proper shipping name :        Tetrafluoromethane

Class :         2.2

UN/ID No. :       UN1982


Proper shipping name :          TETRAFLUOROMETHANE

Class :                                      2.2

UN/ID No. :                               UN1982


Proper shipping name :         TETRAFLUOROMETHANE

Class :                                      2.2

UN/ID No. :                              UN1982

Further Information

Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. The transportation information is not intended to convey all specific regulatory data relating to this material. For complete transportation information, contact an Air Products customer service representative.


NFPA Rating

Health :                 1

Fire :                      0

Instability :           0

HMIS Rating

Health :                0

Flammability :     0

Physical hazard :   3

Tin tức khác
Material Safety Data Sheet - CO
Pre-existing respiratory conditions may be aggravated by over-exposure to Carbon Monoxide. Carbon Monoxide can aggravate some diseases of the cardiovascular ...
Material Safety Data Sheet - CH4
May cause anesthetic effects. In high concentrations may cause asphyxiation. Symptoms may include loss of mobility/consciousness. Victim may not ...
Material Safety Data Sheet - CF4
Exposure to oxygen deficient atmosphere may cause the following symptoms: Dizziness. Salivation. Nausea. Vomiting. Loss of mobility/consciousness.

Giới thiệu

 Về chúng tôi

 Tầm nhìn & Sứ mệnh

 Giá trị cốt lõi

 Sơ đồ tổ chức

 Ban lãnh đạo

 Tuyển dụng nhân sự

 Hình ảnh hoạt động

 Đối tác & Khách hàng

 Liên hệ

Tìm thấy chúng tôi tại

Sản phẩm khí

 Khí đặc biệt

 Khí hỗn hợp

 Khí công nghiệp

 Khí y tế

 Khí dầu mỏ hóa lỏng LPG

Vật tư thiết bị

 Thiết bị ngành khí

 Vật tư ngành khí

 Hệ thống cấp khí

 Hệ thống sản xuất khí

Dịch vụ kỹ thuật

 Kiểm tra chất lượng khí

 Nạp bình khí đặc chủng

 Nạp khí kinh khí cầu và bóng bay

 Khôi phục chân không

 Bơm hút chân không

Tin Tức

 Tin cập nhật

 Tài liệu tham khảo

 An toàn - MSDS

Văn phòng tại Tp. HCM

 Điện thoại: 08.37755313

 Fax: 08.39412967

 Hotline: 0912 259 599


Đại diện tại Long An

 Điện thoại: 0947184937 (A. Thành)

Đại diện tại Thanh Hóa

 Điện thoại: 0942337551 (A. Hoài)

Đại diện tại Hà Nội

 Điện thoại: 0904449885 (A. Chiến)